Sony SLV-340 - Troubleshooting

_ Rp eee oe ee
Troubleshooting
Symptom Remedy
Power The POWER switch does not .
function.
Connect the AC power cord securely.
The power is turned on but the
VCR does not operate.
‘“”
Clock The clock has stopped and “—~- °
lights in the display window.
Playback The playback picture does not .
appear on the TV screen.
Moisture condensation occurs. Turn the power off, unplug the AC
power cord and leave the VCR to dry for over an hour.
The clock stops if the VCR is disconnected from the wall outlet for
more than three hours. Reset the clock (and timer).
Make sure the TV is set to the channel for the VCR. If you are using a
monitor, set it to video input.
The picture is not clear. 7
The picture rolls vertically during ¢
picture search.
Adjust the tracking with the V/& TRACKING NORMAL/SLOW
buttons.
The video heads are dirty (see below). Clean the video heads using the
Sony T-25CL video head cleaning cassette. If this cleaning cassette is
not available in your area, have the heads cleaned at your nearest Sony
dealer (a standard service charge will be required.) Do not use a
commercially available wet-type cleaning cassette, as it may damage
the video heads.
The video heads may have to be replaced. Consult your local Sony
dealer for more information.
Adjust the vertical hold control on the TV or monitor.
The picture has no sound. °
The tape is defective. Use a new tape.
Symptoms caused by contaminated video heads
¢ Normal picture ¢ Rough picture e Unclear picture
¢ No picture (or
black & white
screen appears)
ilitia| eS torminal
36 -EN | Additional Operations