Sony SLV-340 - Page 15

Hookup 4: VCR setup
1 Set the RF UNIT switch to CH 3 (channel 3) or CH 4
(channel 4), whichever channel is not used in your area.
If both are used, set the switch to either channel.
If you made A/V connections (from page 7), you can
skip this step.
| For details, see page 35.
2 Set the A/B switch to “A.”
3 (Canadian model only) Set the on-screen display
language to French if desired. For details, see page 17.
4 set NORM/CATV to CATV:
Set NORM/CATV to CATV
and press EXECUTE.
Press MENU and select
TUNER PRESET.
TUNER PRESET CH 1
MENU
»NORM/CATV NORM #CATV
AUTO PRESET
MANUAL SET *ADD ERASE
*ON Oi}
AFT
FINE TUNING
TIMER SET/CHECK
» TUNER PRESET
CLOCK SET
For details, see page 18.
5 Preset the unscrambled channels into the VCR:
Press MENU and select
TUNER PRESET.
MENU
TIMER SET/CHECK
» TUNER PRESET
CLOCK SET
For details, see page 19.
Select AUTO PRESET
and press EXECUTE.
TUNER PRESET CH1
NORM @CATV
T
*ADD ERASE
*ON OFF
NORM/CATV
AFT.
FINE TUNING
wh de dyp
——~ PLEASE WAIT ==—
- ~
6 Preset the cable box output channel (usually 2, 3 or 4):
Press MENU and select
TUNER PRESET.
MENU
TIMER SET/CHECK
» TUNER PRESET
CLOCK SET
For details, see page 19.
Enter the cable box
output channel.
Set MANUAL SET to ADD
and press EXECUTE.
Channel to be preset
TUNER PRESET
NORM/CATV NORM *CATV
AUTO PRESET
»MANUAL SET *ADD ERASE
°*ON OFF
AFT
FINE TUNING
You
are
now
ready
to
use
your
VCR
A
Quick
reference
to
operations
is
provided
on
the
back
cover
to
help
you
quickly
enjoy
the
basic
functions.
These
procedures
differ
slightly
depending
on
the
hookup
used.
Make
a
note
of
which
hookup
you
used
(Hookup
4)
so
that
you
can
always
follow
the
correct
instructions.
Getting Started
15-EN
peziezs Buiye5