Press '1'/_!, to highlight TUNER PRESET,
then press OK.
ANTENNA/CABLE
AUTO PRESET
F_NE TUNING
_RETURN
SELECT:_]
SET :
QUIT :
3
-Q .@.@
@0
Press the number buttons to select the
channel you want to fine-tune, then press
ENTER.
Selected channel
ANTENNA/CABLE
AUTO PRESET
AFAT AL T AND
FINE TUNING
_RETURN
SELECT:_
SET :
QU_ :
Press t1"/_1"to highlight FINE TUNING,
then press OK.
The fine tuning meter appears.
Press _1_/--iI_ to adjust to a clearer picture,
then press OK.
I _] I|ll_,-_I-¢,
ANTENNA / CABLE
AUTO PRESET
MANUAL SET
SELECT
QUIT _
SET
Note that the AFT setting switches to OFF.
MENU Press MENU to exit the menu.
©
ANTENNA/CABLE
AUTO PRESET
MANUAL SET
_RETURN
SELECT :
OUIT :_
sET :
Tips
• To select the channel on step 3 above, you can also use the CH +/- buttons. In this
case, you don't need to press ENTER.
• If you want to return to the previous menu, highlight RETURN and press OK.
Note
• When adjusting FINE TUNING, the menu may become difficult to read due to
interference from the picture being received.
Getting Started I 57
To Next Page
