Hookup 1 : DVD-VCR setup
Plug the DVD-VCR into an AC outlet.
The DVD-VCR automatically presets the DVD-VCR's clock and TV channels
when the DVD-VCR is plugged into the AC outlet.
to AC outlet,4_,_=_L_L ........................}
AC power cord
The DVD-VCR starts presetting the
clock and channels.
When Auto preset is completed, the
cun'ent time appears in the display
window.
£kA_£k
OitTiq
"UU
You have now completed DVD-VCR setup.
To change the on-screen display language to French or Spanish, see
"Step 4 : Selecting a language" on page 20.
The clock is set using a time signal provided by some TV channels. If the clock
is incon'ect, or %-:--" appears in the display window, see "Using Manual (:lock
Set" on page 24.
To add or disable channels manually, see "Presetting/disabling channels
manually" on page 28.
Notes
• If you cormect the AC power cord before the antenna connections are completed the chalmels
may be incorrectly set. If this happens, see "Step 6 : Presetting channels" on page 26.
• Do not press any buttons on the DVD-VCR or remote commander during Auto preset.
• Auto preset starts automatically only when you plug in the AC power cord for the first time
after you ptu-chase the DVD-VCR.
• Auto preset can be perfomxed by pressing • on the unit continuously for 5 seconds or more
with the DVD-VCR power turned oft'.
16 Basic hookups
To Next Page
Loading...
