Sony SLV-D550P - Recording TV Programs Using the VCR Plus

To stop recording
To stop the VCR while recording, press • STOP.
To use the DVD-VCR after setting the timer
To use the DVD-VCR belbre a timer recording begins, just press I/@. The timer
indicator disappears from the display window and the DVD-VCR switches on.
Remember to press I/(_) to reset the VCR to the timer recording standby mode after
using the VCR.
You can also do the following tasks while the VCR is recording:
• Reset the counter (page 43).
• Display tape information on the TV screen (page 45).
• Check the timer settings (page 58).
• Watch another TV program (page 46).
Tip
• To check, change or cancel the program setting, see "Checking.changing'canceling timer
settings" on page 58.
w
Notes m
• If the VCR does not accept the PlusCode nmnber, this means that: o
O
The PlusCode nmnber is incorrect. "O
Once, Mor Fr, or Weekly was selected incon-ectly. You cannot select MO- FR or Weekly
i'c)ra program that airs more than sexen days ahead. __.
" O
Correctly set the PlusCode nmnber again from step 2. :3
• "_\"nenthe PlusCode number is incorrect, "Ira alid code" will appear in the display. 0_
Recording TV programs using <_
the VCR Plus+ system (SLV-D550P only) 57