Sony SLV-D550P - Page 32

Press tl,/I!, to select "Guide Channel Setup,"
then press ENTER.
4
The upper row shows VCR Plus+ guide channels and the lower row shows
TV channels or cable box out put channels. Press I./* to select the channel
number that does not match the guide channel.
• If you made Hookup 1 (page 15) or 2 (page 17): Enter the actual number
on your TV (and VCR), then press tl,/I!,.
• If you made Hookup 3 (page 19): Enter the cable box output channel
(usually 2, 3, or 4), then press tl,/!1,.
Repeat steps 4 and 5 for each channel number that does not match.
7 (_. Press o_ RETURN to confirm the setting.
RETURN
SETUP Press SET UP to exit the menu.
O
32 +®
Setting up the VCR Plus system (SLV-D550Ponly)