To watch another TV program while recording
Press TV VIDEO to display _TV" in the display window.
VIDEO1
J
If your TV is connected to the VCR using A.V connections, set the TV to the
TV's antenna input; if not, skip this step.
Select another channel on the TV.
To watch a DVD while recording
Press SELECT DVD to control the DVD player.
Press A and place the disc on the disc tray.
Press 11:> PLAY.
The disc tray closes and the DVD player starts playback. The TV screen will
automatically change to the DVD playback screen.
To save a recording
To prevent accidental erasure, break
offthe safety tab as illustrated. To
record on the tape again, cover the tab
hole with adhesive tape.
Tips
• To select a channel you can use the number buttons on the remote connnander. Enter the
channel munber, then press ENTER.
• You can select a video sottrce from the LINE IN 1 or LINE-2 IN jacks using the INPUT
SELECT button.
• The display appears on the TV screen indicating in±\_mmtion about the tape. but the
information will not be recorded on the tape.
• If you do not want to watch TV while recording, you can t_ll_l off the T\% When using a cable
box, make sure to leave it on.
Notes
• The remaining tape length may not be indicated accurately for shoit tapes such as T-20 or
T-30, or tapes recorded in the LP mode.
• It may take up to one minute ±\_r the VCR to calculate and display the remaining tape length
after you press DISPLAY.
• You cannot record a DVD to a VCR tape.
• To watch a TV pro_am chtring video recording, stop disc playback.
46 Recording TV programs
To Next Page
Loading...
