146
Error Messages/Warning Messages/Condition Messages
Appendix
1E NO A11/A12 INPUT No carrier detected on digital audio input on channels 11 and 12.
21 REC INHIBIT MODE The menu settings are to a mode inhibiting recording, or the tape
format does not allow recording.
22 CASSETTE REC INHIBIT The cassette is set to inhibit recording.
29 VPID MISMATCH BIT DEPTH The bit depth specified in the VPID of the input signal does not
match the bit length of the system.
2A VPID MISMATCH COLOR SPACE The color space specified in the VPID of the input signal does not
match the color space of the system.
2B VPID MISMATCH LINK
INFORMATION
The link information specified in the VPID of the input signal does
not match the actual connector connection.
2D INVALID SDI DATA SDI input signal data is invalid.
34 NO CASSETTE COMPARTMENT
MODE
The cassette compartment does not operate because the VTR is in
“no cassette compartment” mode.
3B NO LTC REPRODUCED LTC signal not detected on the tape.
52 NO SUPPORTED PB FORMAT The recording format cannot be played back by this unit.
53 SYSTEM MISMATCH The tape cannot be played with the current system settings.
55 VIDEO PLL UNLOCKED Video lock generator PLL not locked to the video reference signal.
59 INPUT AUDIO DATA MISMATCH
32.000K
The input audio frequency is wrong.
5A INPUT AUDIO DATA MISMATCH
47.056K
The input audio frequency is wrong.
61 Tele-File MEMORY IS FULL The remaining capacity of the Tele-File is low, and therefore the
next recording will overwrite old data.
62 NO AREA FOR Tele-File DATA
ADDITION
There is no space at all in the Tele-File.
63 INVALID FORMAT Tele-File Parts of the Tele-File format are wrong.
64 Tele-File DATA WRITE FAIL A write to Tele-File error occurred.
65 NO Tele-File LABEL The Tele-File could not be recognized, and therefore the cassette is
ejected (HDCAM-SR only).
66 Tele-File DATA WRITE IS INHIBITED Recording or editing was started with the Tele-File in overall write
inhibit mode.
67 Tele-File DATA READ FAIL A Tele-File read error occurred.
71 INVALID FORMAT CONVERSION The settings do not allow format conversion.
72 REC/EDIT DISABLE CASSETTE
FORMAT
The inserted cassette cannot be recorded or edited because of
system settings (recording format, system line, etc). This display
applies only to HDCAM/HDCAM-SR cassettes (SRW-5500 only).
73 NO REFERENCE INFORMATION Cannot lock because there is no 30 frames/second reference
information in 720/59.94p HD SDI input signals.
74 ASYNCHRONOUS VIDEO INPUT When external sync is selected, the external sync signal and the
HD SDI INPUT signal are more than ±5H out of phase.
77 AUTO CUEUP ABORT Auto cue-up was aborted because the target cue-up time code is 1
second or more away from the current time code.
Item number Display Meaning
To Next Page
Loading...
