Sony STR-DN850 - Adjusting the Equalizer (Equalizer)

MULTI CHANNEL AV RECEIVER
STR-DN1050/STR-DN850
Adjusting the equalizer (Equalizer)
You can use the following parameters to adjust the tonal quality (bass/treble level) of the front, center, surround/surround
back and front high speakers.
Level (dB)
Frequency (Hz)
Bass
Treble
1. Select [Settings] - [Audio Settings] from the home menu.
2. Select [Equalizer].
3. Select [Front], [Center], [SUR/SB] or [Front High].
4. Select [Bass] or [Treble].
5. Adjust the gain.
Note
This function does not work when [2ch Analog Direct] is being used.
Frequencies for [Bass] and [Treble] are fixed.
Depending on the audio format, the receiver may play signals at a lower sampling frequency than the original
sampling frequency of the input signals.
Hint
You can also select [Equalizer] in [Sound Effects] from the home menu.
Notes on use
4-488-938-11(1)
Copyright 2014 Sony Corporation
Help Guide
131