Sony STR-DN850 - Setting the Zone 2 HDMI Output (Zone2 Out) (for STR-DN1050 Only)

MULTI CHANNEL AV RECEIVER
STR-DN1050/STR-DN850
Setting the zone 2 HDMI output (Zone2 Out) (for STR-DN1050 only)
When a device such as a TV or AV amplifier is connected to the HDMI ZONE 2 OUT jack, you can output HDMI signals
from the device in zone 2. For details, see “Connecting another amplifier using the HDMI ZONE 2 OUT jack” in
“Connecting another amplifier in zone 2 (for STR-DN1050 only).”
1. Select [Settings] - [HDMI Settings] from the home menu.
2. Set [Zone2 Out] to [On].
Note
When the Zone2 Out function is enabled, the following functions are disabled:
Control for HDMI (“BRAVIA” Sync)
Fast View
Notes on use
4-488-938-11(1)
Copyright 2014 Sony Corporation
Help Guide
166