MULTI CHANNEL AV RECEIVER
STR-DN1050/STR-DN850
Setting the volume control for zone 2 (Lineout) (for STR-DN1050 only)
You can set variable or fixed volume control for the ZONE 2 AUDIO OUT jacks.
1. Select [Settings] - [Zone Settings] from the home menu.
2. Select [Lineout].
3. Select the setting you want.
Variable:
Recommended when using another amplifier that does not have volume control for zone 2.
The volume for the ZONE 2 AUDIO OUT jacks can be changed.
Fixed:
Recommended when using another amplifier with variable volume control for zone 2. The volume for the ZONE 2
AUDIO OUT jacks is fixed.
Note
When [Variable] is set, the volume is turned down by default. Turn up the volume while listening to the sound after
completing setup. The volume for the SPEAKERS SURROUND BACK/BI-AMP/FRONT HIGH/FRONT B/ZONE 2
terminals is changed together with the volume for the ZONE 2 AUDIO OUT jacks.
Notes on use
4-488-938-11(1)
Copyright 2014 Sony Corporation
Help Guide
To Next Page
Loading...
