MULTI CHANNEL AV RECEIVER
STR-DN1050/STR-DN850
Cannot connect to the network.
Make sure the router or the wireless LAN router/access point is turned on.
The network settings on the receiver may be incorrect.
If [Not Connected] appears on the [Information] screen, set up the network connection again.
Confirm that the receiver is connected to the router or the wireless LAN router/access point correctly.
If the system is connected to a wireless network, move the receiver and the wireless LAN router/access point closer
to each other.
If you have initialized the receiver or performed a system recovery on your server, perform the network settings again.
Related Topic
Checking the network information (Information)
Notes on use
4-488-938-11(1)
Copyright 2014 Sony Corporation
Help Guide
To Next Page
Loading...
