Sony STR-DN850 - Synchronizing Audio with Video Output (A;V Sync)

MULTI CHANNEL AV RECEIVER
STR-DN1050/STR-DN850
Synchronizing audio with video output (A/V Sync)
You can delay the output of audio to minimize the time gap between audio output and a visual display.
This function is useful when using a large LCD or plasma monitor or a projector. You can set the function for each input
independently.
1. Select [Settings] - [Audio Settings] from the home menu.
2. Select [A/V Sync].
3. Select the setting you want.
HDMI Auto: The time gap between the audio output and visual display of a monitor connected via an HDMI
connection will be adjusted automatically. This feature is available only when the monitor supports the A/V Sync
function.
0 ms – 300 ms: You can adjust the delay from 0 ms to 300 ms in 10 ms intervals.
Note
The receiver may play signals at a lower sampling frequency than the actual sampling frequency of the input signals,
depending on the audio format.
Notes on use
4-488-938-11(1)
Copyright 2014 Sony Corporation
Help Guide
198