Sony STR-DN850 - Setting the Priority for the Main Zone (Priority) (for STR-DN1050 Only)

MULTI CHANNEL AV RECEIVER
STR-DN1050/STR-DN850
Setting the priority for the main zone (Priority) (for STR-DN1050 only)
When the Zone2 Out function is enabled and you select the same HDMI input for both the main zone and zone 2, there
may be some interference to the audio and video signals in the main zone. To avoid possible interference, you can place
priority on the main zone for HDMI input selection.
1. Select [Settings] - [HDMI Settings] from the home menu.
2. Set [Priority] to [Main Only].
Hint
If you connect TVs that have different resolutions to the main zone and zone 2 but select the same HDMI input for
both zones, the video signals output to each TV are limited to a lower resolution that those of the TVs.
Notes on use
4-488-938-11(1)
Copyright 2014 Sony Corporation
Help Guide
167