Sony STR-DN850 - Speaker Settings; Performing Auto Calibration

MULTI CHANNEL AV RECEIVER
STR-DN1050/STR-DN850
Speaker Settings
Performing Auto Calibration
Calibrating the phase characteristics of the speakers (A.P.M. (Automatic Phase Matching))
Selecting the Auto Calibration type (Calibration Type)
Selecting the speaker pattern and setting the assignment for the speaker terminals (Speaker Connection/SB
Speaker Assign)
Adjusting the speaker level (Level/Distance/Size)
Adjusting the speaker distance (Level/Distance/Size)
Adjusting the speaker size (Level/Distance/Size)
Setting the crossover frequency of the speakers (Crossover Frequency)
Outputting a test tone from each speaker (Test Tone)
Lifting up the sound of the center speaker (Center Speaker Lift Up)
Selecting the unit of measurement (Distance Unit)
Notes on use
4-488-938-11(1)
Copyright 2014 Sony Corporation
Help Guide
43