MULTI CHANNEL AV RECEIVER
STR-DN1050/STR-DN850
Setting the Bluetooth Standby mode (Bluetooth Standby)
You can set the Bluetooth Standby mode so that the receiver can be controlled by a BLUETOOTH device even when the
receiver is in standby mode.
1. Press BLUETOOTH on the receiver.
You can also select [Listen] - [Bluetooth] from the home menu.
2. Press OPTIONS.
The options menu appears.
3. Select [Bluetooth Standby].
4. Select [Yes].
The receiver turns on automatically when you establish a BLUETOOTH connection from a BLUETOOTH device.
Select [No] to turn off this function.
Note
When the receiver is in standby mode, the (on/standby) indicator on the front panel lights up in amber if [Bluetooth
Standby] is set to [Yes].
You can only select this parameter when a BLUETOOTH device is paired.
Hint
You can select [Bluetooth Standby] in [Settings] - [Bluetooth Settings] from the home menu.
Notes on use
4-488-938-11(1)
Copyright 2014 Sony Corporation
Help Guide
To Next Page
