MULTI CHANNEL AV RECEIVER
STR-DN1050/STR-DN850
Dolby Digital or DTS multi-channel sound is not reproduced.
Check that the DVD, etc. you are playing is recorded in Dolby Digital or DTS format.
When connecting the DVD player, etc., to the digital input jacks of this receiver, make sure the digital audio output
setting of the connected device is available.
Set [Audio Out] to [AMP] in the HDMI Settings menu.
You can only enjoy High Bitrate Audio (DTS-HD Master Audio, Dolby TrueHD), DSD and Multi Channel Linear PCM
with an HDMI connection.
Notes on use
4-488-938-11(1)
Copyright 2014 Sony Corporation
Help Guide
To Next Page
Loading...
