MULTI CHANNEL AV RECEIVER
STR-DN1050/STR-DN850
Cannot connect the receiver to a service.
Make sure that the router or the wireless LAN router/access point is turned on.
Check the network information. If [Not Connected] appears, set up the network connection again.
If the system is connected to a wireless network, move the receiver and the wireless LAN router/access point closer
to each other.
If your contract with your Internet provider limits Internet connection to one device at a time, this device will not be
able to access the Internet when another device is already connected. Consult your carrier or service provider.
Related Topic
Checking the network information (Information)
Notes on use
4-488-938-11(1)
Copyright 2014 Sony Corporation
Help Guide
To Next Page
Loading...
