MULTI CHANNEL AV RECEIVER
STR-DN1050/STR-DN850
Confirming active subwoofer setup
When a subwoofer is connected, turn on the subwoofer and turn up the volume prior to activating the subwoofer. Turn
the LEVEL to just before the mid-point.
If you connect a subwoofer with a crossover frequency function, set the value to maximum.
If you connect a subwoofer with an auto standby function, set it to off (deactivated).
Note
Depending on the characteristics of the subwoofer you are using, the setup distance value may be different from the
actual position.
Notes on use
4-488-938-11(1)
Copyright 2014 Sony Corporation
Help Guide
To Next Page
Loading...
