56
Channel Configuration Menu
Chapter 3 Menu
Copy From Copies signal setting data from other channel.
Note
Use the controller with software version 1.6 or higher to use the Copy From function.
Other CH Copies other data in this monitor.
When the item is selected, you can designate the channel to be copied.
Other Monitor Copies data from other monitor.
Monitor ID Enters the ID number of the source monitor.
When the NETWORK switch is set to PEER TO PEER, this is not selectable.
When the item is selected, you can designate the source monitor.
When the ID number is entered, you can designate the channel to be copied.
Memory Stick Copies data in the “Memory Stick”.
When the item is selected, the file names in the source “Memory Stick” are displayed.
When the file is selected, you can enter the channel number in the selected file.
Menu Function and operation ([ ]: factory setting)
To Next Page
Loading...
