Sony Trimaster EL BVM-E250 - Functions Supported in Software Version; And 1.2

10
Functions Supported in Software Version 1.1 and 1.2
Chapter 1 Overview
Functions Supported in Software Version 1.1 and 1.2
The following new functions are supported for Version 1.1 and Version 1.2 of the BVM-E250.
Software Version 1.1
1) Use the controller with software version 1.6 or higher to use this function.
Menu Supported function Reference page
•Copy From
1)
(in the Picture Adj menu of the Adjustment menu)
(in the Color Temp Adj menu of the Adjustment
menu)
(in the Channel Configuration menu)
(in the Marker Setting menu of the Function Setting
menu)
(in the File Management menu)
Data in this monitor, in another monitor or in a “Memory
Stick” can be copied.
45, 47, 56, 61, 77
•DisplayPort
(in the Format menu of the Channel Configuration
menu)
(in the RGB Range menu of the Channel
Configuration menu)
The settings for the DisplayPort signal are available. 50, 55
• HDMI/DisplayPort Auto
(in the Matrix menu of the Channel Configuration
menu)
(in the RGB Range menu of the Channel
Configuration menu)
Matrix switching (Matrix) and quantization range setting
(RGB Range) for the HDMI or DisplayPort signal are
available.
52, 55
• HDMI/DP YCbCr
• HDMI/DP RGB
(in Input Detection of the Gamut Error Display
menu of the Function Setting menu)
The upper and lower limits of the HDMI or DisplayPort
signal level can be set.
63, 64
• HDMI/DP Status
(in the System Status menu)
The information of the HDMI and DisplayPort signals
can be displayed.
80
• Over Range
(in the On Screen Set menu of the System
Configuration menu)
The zebra pattern can be displayed on the portion of
image that exceeds the allowable range of the internal
signal processing circuit.
74
•Save To
1)
(in the File Management menu)
Stores the system data to a “Memory Stick”. 77
• Delete
1)
(in the File Management menu)
Deletes a file in the “Memory Stick”. 78