Sony Trinitron KV-20V80 - Spochications

M§®
Troubleshooting
(continued)
Only snow and noise
appear on the screen
Cannot receive upper
channels (UHF) when
using an antenna
Cannot receive any
channels when using
cable
CABLE setting may not be set
correctly in the SET UP menu.
¢ Antenna/cable connections may
not be correct.
¢ TV may be set to AUX mode.
CABLE setting may not be correct
in the SET UP menu.
CABLE setting may not be set
correctly in the SET UP menu.
¢ Ensure that you have selected the
correct CABLE mode in the
SET UP menu. (see page 23)
Press ANT on your remote
control to change the input mode.
(see page 15)
Ensure that CABLE is set to OFF
in the SET UP menu. (see page 23)
Use AUTO PROGRAM to add
receivable channels that are not
presently in TV memory. (see
page 24)
¢ Ensure that CABLE is set to ON
in the SET UP menu. (see page 23)
Use AUTO PROGRAM to add
receivable channels that are not
presently in TV memory. (see
page 24)
e
Cannot gain enough
volume when using a
cable box
¢ Volume may not be adjusted on
your cable box.
¢ Press TV (FUNCTION) and
adjust the TV's volume.
TV is fixed to one
channel
CHANNEL FIX settings may not
be correct.
L
* Check your CHANNEL FIX
settings. (see page 23)
If,
after
reading
these
operating
instructions,
you
have
additional
questions
related
to
the
use
of
your
Sony
television,
please
call
our
Direct
Response
Center
at
1-800-222-SONY
(7669).
30
MH®@ Specifications
Supplied accessories
Remote control RM-Y135A (1)
(KV-20V80 only)
Remote control RM-Y165 (1)
(KV-27S40, 27V40 only)
Remote contro! RM-Y167 (1)
(KV-27S45, 27S65, 27V45, 27V65 only)
Batteries size AA (R6) (2)
Optional accessories
Connecting cables
VMC-810S/820S, VMC-720M,
YC-15V/30V, RK-74A
TV Stand SU-27A3
(All models except KV-20V80)
U/V mixer EAC-66