31
Menus
Using the Channel Menu
Favorite
Channels
Quick access
to favorite
channels
1 Use the F or f buttons to highlight the position (1-8) where you want
to set a favorite channel, then press .
2 Use the
F or f buttons to find the channel you want to add to your
favorite channels.
3 Press to select the channel. The TV will automatically change to
the selected channel.
4 Press
G to return to the Channel menu or press to exit.
Cable Use the
F or f buttons to highlight one of the following options, then press
to select it.
On: Select if you are receiving cable channels with a CATV cable.
Off: Select if you are using a TV antenna.
Channel Fix Use the
F or f buttons to highlight one of the following options, then
press to select it.
Off:
Channel Fix is not set.
2-6:
Select when you want to control all channel selection through
a cable box or VCR. Select the appropriate channel (usually 3
or 4) and use the cable box’s or VCR’s remote control for
channel selection.
Video 1: Select from available video inputs when you have connected
video equipment (e.g., a satellite receiver) and you want your
TV fixed to it.
To access the Channel menu, use the following steps:
Channel Setup
Favorite Channels
Cable
:
Off
Channel Fix
:
Off
Auto Program
Channel Skip/Add
Channel Label
Move
Select
End
To Display To Highlight To Select
Press f to highlight an option; then press .
✍ To use Favorite Channels, exit all menus and press . Press F or f to move the cursor to the
desired channel number and press .
✍ After changing your cable settings, you will need to perform Auto Program. See “To perform Auto
Program again” on page 23.
To Next Page
Loading...
