Sony Trinitron KV-32TW77 - Page 12

—=—Cl=
Audio Syst
Listening to TV or connected VCR sound through an audio system
KV-27TS32
t= : Signal flow
RK-74A (not supplied)
Set the amplifier's
function to line input.
to AUDIO-R (red)
Preparing for use
Display the mode set menu and set SPEAKER to OFF to
cut off the TV speaker sound (p. 37), and listen to the TV's
sound solely through the audio system speakers.
26 Chapter 1: Setting Up
Amplifier
By setting AUDIO OUT variable, you can adjust the bass, treble
and balance, or select surround of an MTS (Multichannel TV
Sound) mode, using the on-screen menus (pp. 34-36).
Connecting active super woofer (supplied with KV-32TS46 only)
KV-32TS46
Rear of active super woofer
to AUDIO OUT
AC outlet AUDIO IN/OUT
jacks
RCA audio pin cable
{supplied)
active super woofer
ate : Signal flow
Set the amplifier's
function to input.
woofer level Ampiitier
Preparing for use
Same
as
p.
26.
Impedance:
47
kilohms
Protes
Power
consumption:
« You should only connect the KV-32TS46 to the AC outlet on the 9 W (100 Hz)
active super woofer. i
*
To
make
the
active
super
woofer
stable,
attach
the
felt
feet
7
CEUX
G2
xian.)
(supplied)
to
the
bottom.
Weight
:
3.9
kg
« When you use'the dedicated stand (not supplied), remove the (8 Ibs 10 oz)
rear panel of the stand.
Active Super Woofer Specification:
Input: 500 mVrms (100% modulation)
Output : 500 mVrms (100% modulation)
Dimensions: 435 x 165 x 164 mm (W x H x D)
Chapter 1: Setting Up 27
SLNALCE/LELNLSCE-AD BSLNMLLEC/LZLNM1ALLSE-NOI
a
;
<
=
=
o