Datalogger Version
Shows software version of the datalogger.
CAN bus ID
Here you can see the ID of the controller on the CAN bus.
Sensor send interval
The send interval determines how often the sensor and output values of the controller may be send via CAN. If a value changes, it is
sent and starts the interval. The next values are not sent until the interval has expired. If no value changes, nothing is sent.
If there are several controllers in the CAN network, a too short send interval can lead to an overload of the CAN network.
8. Menu Lock
Secure the controller against unintentional changing and compromise of basic func-
tions.
Menu lock active = "On"
Menu lock off = "Off"
In addition, the "Simple" menu view can be used to hide menu items that are not
necessary for the daily use of the controller after commissioning. The menu item
"Menu lock on/off" is also hidden when the "Simple" menu view is selected!
The menus listed below remain completely accessible despite the menu lock being
activated, and can be used to make adjustments if necessary:
1. Measurement values
2. Statistics
4. Settings
6. Special Functions
7. Menu lock
9. Language
9. Service Values
Serve for remote diagnosis by a specialist or the manufacturer in the event of
errors, etc.
Enter the values into the table when an error occurs.
10. Language
To select the menu language. During initial commissioning and longer power inter-
ruptions, the query is made automatically. The choice of languages may differ
depending on the model. Language selection is not available for every model.
44
To Next Page
Loading...