833 User Guide
48
BLUETOOTH SETUP PROCEDURE FOR IPAD
1. On the 833, set System>Bluetooth to On.
2. Open the SD-Remote app and touch the Sound Devices logo
button to display a list of 8-Series devices within Bluetooth LE range.
When the Devices Found list is displayed, Bluetooth LE disconnects
from the previously connected 8-Series Mixer-Recorder.
3. Connect to a specic 8-Series device by touching the serial number.
‘Connecting...’ is displayed. When connection is
successful, the SD-Remote meter view is displayed.
To run SD-Remote, the iPad must be running iOS 13 or higher.
To run SD-Remote, the iPad must be running iPadOS 13 or higher.
“No Bluetooth Connection” popup will appear when SD-Remote
does not detect presence of the selected 8-Series device.
For optimal bluetooth LE connection, the Sound Devices XL-ANT2.4
Antenna must be tted to the SMA port of the 8-Series device.
SETTING A PASSWORD
To prevent unauthorized access to the 8-Series
Mixer-Recorder via Bluetooth LE:
1. Navigate to System-Bluetooth-Set Password.
2. Create a password using the on-screen keyboard.
3. Use the Fav toggle to save the password.
4. Press “Ok” in the “Set New Password” dialog box.
5. Connect your tablet via SD-Remote to the
8-Series device as described above.
6. Enter the password and press “Enter” to allow connection.
7. Toggle “Remember Password” to allow the tablet
to connect without reentering password.
TO REMOVE A PASSWORD
1. In the 8-Series menu, navigate to System-Bluetooth-Clear Password.
2. Press “Ok” in the “Clear existing password” dialog box.
To Next Page
Loading...
Need help?
General
