Hardware Installation
SY-7VBA133U
19
Chapter 2
HARDWARE INSTALLATION
Congratulations on your purchase of SY-7VBA133U Motherboard. You
are about to install and connect your new Motherboard.
Note:
Do not unpack the Motherboard from its protective
anti-static packaging until you have made the following
preparations.
2-1 PREPARATIONS
Gather and prepare all the following hardware equipment to complete the
installation successfully:
1. Socket 370 processor with built-in CPU cooling fan (boxed type).
Note:
This Motherboard supports non-boxed type CPUs. The heavier
CPU cooling fan requires the installation of a CPU support stand.
2. DIMM memory module (s)
3. Computer case and chassis with adequate power supply unit
4. Monitor
5. PS/2 Keyboard
6. Pointing Device (PS/2 mouse)
7. Speaker(s) (optional)
8. Disk Drives: HDD, CD-ROM, Floppy drive…
9. External Peripherals: Printer, Plotter, and Modem (optional)
10. Internal Peripherals: Sound card, Modem and LAN cards (optional)
To Next Page
Loading...
Need help?
General
