BIOS Setup Utility
SY-7VBA133U
78
3-7.2 MULTI I/O ADDRESSES
Default settings for multi-I/O addresses are as follows:
Port I/O Address IRQ Status
LPT1
378H 7 ECP/EPP
COM1
3F8H 4
COM2
2F8H 3
Warning:
If a default I/O address conflicts with other I/O cards
such as sound card, you must change one of the I/O addresses to
remedy to this address conflict. (I/O addresses can be adjusted from
the BIOS Setup Utility)
3-8 PC HEALTH STATUS
This option sets the Motherboard's PC Health Status.
CMOS Setup Utility – Copyright ( C ) 1984-2001 Award Software
PC Health Status
Current CPU Temp. 37 º C / 98 º F
Current System Temp. 31 º C / 87 º F
Item Help
Current CPUFAN Speed 5192 RPM
Current CHAFAN Speed 0 RPM
Vcore 1.73 V
2.5V 2.56 V
3.3V 3.41 V
5V 5.15 V
12V 12.18 V
Menu Level
:Move
Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7: Optimized Defaults
Note:
Starred (*) items will disappear when the [Resources
Controlled By] option is set to [Auto].
To Next Page
Loading...
Need help?
General
