BIOS Setup Utility
SY-7VBA133U
72
3-6.1 Power Management Controls
Setting Description Note
Lets you define the HDD and
system power down times.
Default
Doze
timer
Standby
timer
Suspend
timer
HDD
power
down
Min Saving 1 Hour 1 Hour 1 Hour 15 Min
Power
Management
Max Saving 1 Min 1 Min 1 Min 1 Min
S1(POS) Default
ACPI Suspend
Type
S3(STR)
The system will enter the S1
state during suspend. (Low
latency wake up)
Suspend -->
Off
Default
Video Off
Option
Always On
All Modes
--> Off
When enabled, this feature
allows the VGA adapter to
operate in a power saving mode.
V/H
Sync+Blank
Default
Blank screen
Video Off
Method
DPMS
Selects the method by which the
monitor is blanked.
3 Default
MODEM Use
IRQ
3-11, NA
Assigns an IRQ# to the modem
device.
Instant-off Default
Soft-Off by
PWR-BTTN
Delay 4 Sec. Turns off the system power 4
seconds after pushing the power
button.
To Next Page
Loading...
