8999151EN: v1 11/03/2021
11
Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
1.3 Machine Identification
Each machine is equipped with a serial plate; see Figure 1.3 that includes the following data in this order:
1. UKCA Conformity Marking.
2. Machine Whole Goods Code (WGC).
3. Serial number of the machine.
4. Mass in kg.
5. Production Year (year of construction).
6. Design conformity standard.
7. Machine Product Group Code.
8. EU Authorised Representative QR scan code.
9. Manufacturer marking with name and address.
10. EAC Eurasian/Russian Conformity Marking.
11. EC European Conformity Marking.
Figure 1.3 – Serial Plate
Data on the Spearhead manufacturer’s plate should always be referred to when requesting assistance and/or
requiring replacement spare parts.
This data can identify the machine and its characteristics and specification for its particular time of manufacture,
certifying that it responds to current regulations. For this reason the plate should never therefore be removed nor
be used for other purposes; if the machine is dismantled, it should be destroyed to prevent any form of abuse.
By utilising a smart phone and scanning the Authorised Representative QR scan code found on the right-hand
side of the serial plate (ref 8, Figure 1.3) using a suitable QR scanning App, you can find details for Spearhead
Machinery authorised representatives for its various territories.
The serial plate is located on the front channel of the machine, underneath the headstock; see Figure 1.4.
Figure 1.4 – Serial Plate Location
To Next Page
Loading...
