Spearhead Multicut 300 - Machine Specification; Standard Specification

8999151EN: v1 11/03/2021
13
Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
1.5 Machine Specification
1.5.1 Standard Specification
Multicut
300
Tractor
Recommended
Minimum Tractor HP
50hp/37kW
PTO
Speed
1000 RPM (540 RPM optional)
Size
35mm (1 3/8 inch), 6 spline (standard) or 21 spline (optional)
Protection
Automatic Torque Limiter
Machine
(1) (2)
Mass
1050kg (2315lbs)
Hitch
Category 2 mounted with floating clevis top link
Cutting Width (A)
2.84m (9’ 4”)
Machine Width (B)
3.03m (9’ 11”)
Length (C)
2.73m (9’)
Overall Height (D)
1.19m (3’ 11”)
Deck Height
(underside to skid) (E)
0.24m (10”)
Wheel Arms
4 position, manual adjustable
Tailwheels
2
Gearbox
Lubricant
Splitter
EP80-90W or GL-4/GL-5
Rotor (x2)
85W-140
Oil
Capacity
Splitter
1.70l (3.00 pints)
Rotor (x2)
TBC
Blades
12mm (quantity)
4
Tip Speed
85mps (16734 fpm)
Cutting
Capacity
Height
10mm-350mm (1/2”-14”)
Diameter
100mm (4”)
Driveline
Approval
ASAE Category 4
Protection
Automatic Torque Limiter
Table 1.2 – Multicut 300 Standard Specification
Notes:
(1) Spearhead constantly reviews and improves product designs and reserve the right to change this
information. Actual machines may vary from the above specification. Contact your Spearhead
Sales representative if you have any queries.
(2) All dimensions are determined from computer models, so actual measurements may vary slightly.