Spearhead Multicut 300 - Other Safety Decals

8999151EN: v1 11/03/2021
29
Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
2.
3.
4.
5.
6.
Figure 2.2 – Other Safety & Instruction Decals
2
Instruction: - Grease every 8
hours
Placed and pointed towards components of the machine which should
be greased at least once every 8 hours.
3
Instruction: - Designated lifting
point
Placed at positions on machine where safe lifting should be carried out.
4
Instruction: - Keep chains tight
Ensure that the tractor lower link chains are of a sufficient length to
ensure that they are kept tight at all times when the rotary mower is
fitted.
5
Instruction: - P65 cancer and
reproductive harm
Operating, servicing and maintaining this equipment can expose you to
chemicals which are known to the State of California to cause cancer
and birth defects or other reproductive harm.
6
Warning/Instruction: - PTO
operating speed
Indication to the correct operating speed of the machine when in work.
540/1000 RPM.
Table 2.2 – Other Safety & Instruction Decal Definitions
For the placement of these decals on each of these machines, please refer to Section 2.5.2.