8999151EN: v1 11/03/2021
4
Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
Multicut 300 Rotary Mower
This manual covers the Multicut 300 mounted rotary mower which has a 3.0m cut width.
This mounted machine can be specified with various specifications of blade carriers and driveline options to
suit the end users specific requirements.
These machines are fitted with 1000 rpm as standard (540 rpm is optional) and are available with various
input shaft options.
It is essential that the safety guards and chains are always fitted during operation and that the machine is
operated in line with the procedures and practices detailed in this manual.
IMPORTANT
This operator’s manual should be regarded as part of the machine. Suppliers of both new and second-hand
machines are advised to retain documentary evidence that this manual was provided with the machine.
This machine is designed solely for ground vegetation control and must not be used for any other purpose.
Use in any other way is considered as contrary to the intended use. Compliance with, and strict adherence
to, the conditions of operation, service, and repair, as specified by the manufacturer, also constitute
essential elements of the intended use.
This machine should be operated, serviced, and repaired only by persons who are familiar with its
characteristics and who are acquainted with the relevant safety procedures.
Accident prevention regulations, all other generally recognised regulations on safety and occupational
medicine, and all road traffic regulations must always be observed.
Any arbitrary modifications carried out to this machine may relieve the manufacturer of liability for any
resulting damage or injury.
It is potentially hazardous to fit or use any parts other than genuine Spearhead parts.
The company disclaims all liability for the consequences of such use which, in addition, voids the machine
warranty.
To Next Page
Loading...
