Spectra Precision Focus 30 User Manual

4 Setup
36 Spectra Precision FOCUS 30 User Guide
Starting the Instrument
To start the instrument please press the on/off button about 1second (one single beep)
on right side of the instrument, this will also start the Windows CE operating system.
This subchapter describes sequentially
how different settings can be done in the field
software in Face1 Control Unit as well as in the Face2 Control Unit.
• The settings in the Face2 CU are accessible only
without starting the field
software. It is recommended especially if you want to work in Robotic mode.
• When Windows CE has started select your field software from the start menu.
Please refer
to your Spectra Precision Survey Pro
™
documentation for
supplementary information.
Fig. 4-2 Starting instrument

Spectra Precision Focus 30 Specifications

General

Brand	Spectra Precision
Model	Focus 30
Category	Measuring Instruments
Language	English