Spectra Precision Focus 30 - Starting and Settings Via Face1 Control Unit

Spectra Precision FOCUS 30 User Guide 37
4 Setup
Starting and Settings via Face1 Control Unit
Screen Actions and Comments
Fig. 4-3 Face1 screen after instrument start
While starting Windows CE the
Spectra Precision logo screen will show for
s
everal seconds and then the menu to work in
Windows CE will appear.
Fig. 4-4 Face1 screen after starting Windows CE
Start the software Spectra Precision Survey Pro
by tapping the Survey Pro
icon.
Note – StepDrive motor system and Focus
system are already usable at this phase.
Fig. 4-5 Face1 screen while starting SP Survey Pro
Instrument loads application software
Spectra Precision Survey Pro.
Fig. 4-6 Electronic bubble for leveling process
After starting the Spectra Precision Survey Pro
the screen shows the Level menu. Level the
instrument with the help of the electronic bubble.