Spectra Precision Focus 30 - Connecting to an External Control Unit

4 Setup
66 Spectra Precision FOCUS 30 User Guide
Connecting to an External Control Unit
Spectra Precision Nomad
®
, Recon
®
and Ranger
™
can be used as control units for the
Spectra Precision FOCUS 30 Total Station.
The controller can be connected to the Spectra Precision FOCUS 30 Total Station via
ca
ble or via radio.
Connecting with Cable - Instrument Version StepDrive and LockNGo
The controller is connected from the Spectra Precision FOCUS 30 Total Station
com port to the USB or the RS232 connector.
Controller Cable
Recon 53002021
Nomad 53002021
Ranger 73840019
Fig. 4-54 External controller connected to the Spectra Precision FOCUS 30 Total Station with
cable for StepDrive and LockNGo measurements.
COM Port
RANGER
USB Port