Spectra Precision Focus 30 User Manual

Spectra Precision FOCUS 30 User Guide 87
6 Instrument Technology
Power Management
The power management in the Spectra Precision FOCUS 30 Total Station instrument
can set the instrument to one of three different modes.
•Off Mode
• On Mode - all instrument functions
• Suspend Mode - to save power and replace empty battery
Note – Saving power is also the possible with an economical use of the Control Unit
Face1 Backlight, for settings see
Display Backlight Face1 Control Unit, page 23.
Instrument
Off Mode
• Press the Trigger key for 1second (single beep) to turn on the instrument.
Note – During Off Mode the Trigger key LED is off.
On Mode
• When starting the instrument it will enter a Waiting mode, where it will wait for
an external connection for about 5 minutes. While in waiting mode the Trigger
key LED will flash once every second and Face2 Display will show Waiting.
During this time it is possible to start the application program, or, prepare the
settings for robotic measurements. The StepDrive motor system and focus
system are usable during this time.
• If the instrument is not used for 5 minutes (default) the instrument will go to
Suspend Mode and Face2 display will show “Waiting (suspend)”.
• To turn Off the instrument press the Trigger key for 3 seconds - one beep and
one double beep.
• For setting the instrument in Suspend Mode press the Trigger key for one
second (single beep).
• The instrument will go to Suspend Mode if the battery is low (battery capacity
less than 5%), which enables you to replace the battery within a period of 10 to
15 minutes.
• Without replacing the battery the instrument will go to Off Mode if the battery
capacity is less than 2
% and any unsaved data will be lost
Note – During On Mode the Trigger key LED will be on solid.

Spectra Precision Focus 30 Specifications

General

Brand	Spectra Precision
Model	Focus 30
Category	Measuring Instruments
Language	English