Spectra Precision FOCUS 35 - Page 119

Chapter 4
Troubleshooting
P/N 79000035_SM, Version 1.5 4 - 33 Focus 30/35 Service Manual
2 V knob: no movement
Drive System: error message
warning 6
Drive System: turn event
error warning 6 B D D1
FI: 10 Code: 0xf001
Message: Axis: 1 B1: 0 B2: 1
LB blocke
FI: 10 Code: 0xf005
Message: 2|0|99|-
100|8600|PositionHV faile
FI: 10 Code: 0x9c52
Message: Req x6e got res 9
Knobs Error: 0xf001
(61441)///drives V: Error:
0xf001 (61441)
Check the Solenoid V
Exchange the Coarse drive V
3 Drive System :Turn event
error warning 6 B D1 C C1
FI: 10 Code: 0xf005
Message: 3|0|99|100|-
126229100|PositionHV faile
FI: 0 Code: 0x9c5d Message:
SNPInCompletionCallback
Status: 262
Check Coarse drive motor V
Exchange the Coarse drive V
4 Subsystem error drives
Drive system not initialied 2
3 6 B D1 C
FI: 1 Code: 0x9c4e Message:
Drive system: Not initialized
( 2 3 4
FI: 10 Code: 0xf005
Message: 3|99|0|1420000|-
100|PositionHV faile
Drives: Error: 0xf000
(61440), ReportingFI: 10,
Info: Code: 0xf000 P0:
0x0000 P1: 0x80000000 P2:
0x0000000
Knobs:Error: 0xf000
(61440), ReportingFI: 16,
Info: Code: 0xf000 P0:
0x0000 P1: 0x80000000 P2:
0x0000000
Check Fine drive horizontal
Exchange the Fine drive Hz
Item System Monitor messages
and message codes stored in
*.fsmx file
Error Log stored in
*.irep file
Recommendation