Chapter 4
Troubleshooting
P/N 79000035_SM, Version 1.5 4 - 35 Focus 30/35 Service Manual
Sensor specific messages Subsystem: FI_DIST_V3
General status combined from communication status 1 - 6 and sensor specific messages A - D:
Unknown
Ok
Not communicating...
Not initialized...
Not active...
Timeout warning
Failed warning
Selftest failed
Measurement timeout
PR measurement failed warning
DR measurement failed warning
PR measurement failed
DR measurement failed
Sensor specific messages Subsystem: FI_Dist_V3
C HA Knob Ok 0 0- Ok status
1- Error message
Value Value description Status Ok Counter Error Counter
A
Selftest Ok 1 0- Ok status
1- Error message
B Meas event timeout Ok 1 0- Ok status
1- Error message
Additional results
perfoming a
Diagnostics:
C1 Could NOT measure
3 times to prism.
D1 Could NOT measure
3 times to DR target.
Value description Ok Counter Weak Signal
Counter
To Strong Sig-
nal
Counter
Fatal error
counter
PR Results 0 000
DR Results 0 000
Value Value description Status Ok Counter Error Counter
To Next Page
Loading...
