Spectra Precision FOCUS 35 - Page 221

Chapter 5
Maintenance and Repair
P/N 79000035_SM, Version 1.5 5 - 91 Focus 30/35 Service Manual
2 Clamp Tension gear
V.
A. Turn the vertical
axis to see the hole
on Tension gear see
Fig. 5-61 on page
5-81 .
B. Plug the Clamping
tool V in the hole to
fix the tension of
the Tension gear.
The preload of the
Tension gear is fixed,
in case only the
Coarse drive V has to
be exchanged.
Fig. 5-70 Clamping Tension gear
Item Performance Action Result Notes
A
B
Clamping tool
Tension gearl