Chapter 6
Adjustment and Verification
P/N 79000035_SM, Version 1.5 6 - 59 Focus 30/35 Service Manual
9 Align transmitter
beam at close range
(30 meter).
A. Aim to a 30 meter
reflecting target
B. Select
Switch filter
motor HIGH/LOW
check box.
C. Click Filter motor
HIGH.
D. Adjust the spot to the
target with the
vertical and
horizontal
adjustment screws,
see Fig. 6-43 on page
6-58 .
Tolerance:
<10“ = 1/2 of
double line on
instruments
cross-hair).
Laser adjustment
plate 57013007
The adjustment of the
Transmitter spot,see
Fig. 6-45 on page 6-
59 , has to be done
under dark light
conditions.
Fig. 6-45 Transmitter beam alignment in 30 m distance
10 Verify transmitter
beam alignment to
infinite and close
range.
Repeat item
3 to 9 and
realign, if necessary, the
Transmitter.
Tolerance:
<10“ = 1/2 of
double line on
instruments
cross-hair).
Item Performance Description Result Notes
To Next Page
Loading...
