Spectra T950 - Page 14

Prepare for the Replacement Prepare the Left Frame
March 2015 HAX Motor Replacement—Spectra T950 Library
14
Remove the Media Cover, Cable Guard, and Shelves
1. Usea#2Phillipsscrewdrivertofullyloosenthefourcaptivescrews
securingthemediacove rtothefrontoftheframe.
2. Carefullyremovethemediacoverfromtheframeandsetitaside.
3. Usea#2Phillipsscrewdrivertoloosenthetwocaptivescrewssecuring
thecableguardtotheframe.
4. Carefullyremovethecableguardfromtheframe.
5. RemoveanyTeraPackmagazinesonthebottomtwoshelves,cover
themwithdustcoversifavailable,andsetthemaside.
6. Removethebottomtwomediashelvestoprovideaccesstotheinterior
ofthelibrary.
Figure 15 Remove the media cover and cable guard.
Loosen cable
guard screws (2)
Cable guard
Media cover
Loosen media
cover screws (4)
Remove screws (2)
(media frame only)
Figure 16 Remove the bottom two media shelves.
Pull the shelf straight outRemove the media guide