Spectra T950 - Page 13

Prepare for the Replacement Prepare the Left Frame
March 2015 HAX Motor Replacement—Spectra T950 Library
13
Remove the Fan Assembly (Main Frame Only)
1. Usea#2Phillipsscrewdrivertoloosenthefourcaptivescrewssecuring
thefanassemblytothefrontoftheframe.
Note: Donotremovethefilterfromthefanassembly.
2. Carefullypullthefanassemblystraightoutoftheframe.
3. Setthefanassemblyaside.
4. ContinuewithRemovetheMediaCover,CableGuard,andShelveson
page 14.
Figure 14 Loosen the captive screws securing the fan assembly to the frame.
Captive screws (4)