Spectra T950 - CHAPTER 1 Library Overview; LIBRARY FEATURES

Install the HAX Motor Mount the HAX Motor
March 2015 HAX Motor Replacement—Spectra T950 Library
22
2. Fromthefrontofthelibrary,inserttheHAXmotorgearthrough the
openingintheHAXbelthousingsothattheHAXmotorbeltfitsover
thegearandthemountingbracketfitsflushagainstthehousing.
3. Usinga#2Phillipsscrewdriver,looselyinstallthefourscrewssecuring
themotormountingbrackettothebelthousing.
Figure 26 Place the HAX motor in the HAX belt
housing (viewed from the front of the left-most
frame).
Figure 27 HAX motor in position.
Notch for tensioning
spring standoff
HAX motor belt
Belt housing
Notch for tensioning
spring standoff
Belt housing Mounting bracket