SpectraLink IP-DECT 200 - Page 26

BROADSOFT PARTNER CONFIGURATION GUIDE – SPECTRALINK IP-DECT SERVER SERIES 20-BD5445-00
©
2019 BROADSOFT INC. PAGE 26 OF 49
5.2.1.2 Create Device Type-specific Tags
Browse to System → Resources → Device Management Tag Sets and click Add to add a
new tag set. Configure the tag set name using the device name appended by Tags:
Spectralink-IP-DECT tags. Add the device type-specific tags in the following table to the
device tag set. If the tag set already exists, make sure that at least the tags marked as
required are defined.
Tag Name Valid Settings Description
%IP-DECT-DECT-
ACCESSCODE%
1-8 digits Access code is required to
subscribe handsets.
%IP-DECT-DECT-
SUBSCRIPTIONALLOWE
D%
true/false If allowed it is possible to
subscribe new handsets to the
system.
%IP-DECT-LANGUAGE% da - Danish
de - German
cs - Czech
en - English
es - Spanish
fi - Finnish
fr - French
it - Italian
nl - Dutch
no - Norwegian
pl - Polish
pt - Portuguese
ru - Russian
sv - Swedish
tr - Turkish
Language used for messages
sent from IP DECT Server to
handsets.
%IP-DECT-LICENSE% A comma separated list of
license codes
License code to activate extra
features.
%IP-DECT-LOG-SYSLOG-
FACILITY%
0-18 Syslog facility used for log
messages.
%IP-DECT-LOG-SYSLOG-
HOST%
IPv4/IPv6 address/FQDN Remote syslog server.
%IP-DECT-LOG-SYSLOG-
LEVEL%
debug, info, notice, warning,
error, critical, emergency
Minimum syslog level that will be
sent to the server.
%IP-DECT-LOG-SYSLOG-
PORT%
0-65535 Remote syslog server port.
%IP-DECT-MR-AUTO-
ENABLE%
true/false Specifies if automatic update is
enabled or disabled.
%IP-DECT-MR-AUTO-
FORCE%
true/false Specifies if an automatic update
should be executed immediately
or wait until devices are idle.
%IP-DECT-MR-AUTO-
START-TIME%
immediately, hh:mm Specifies when to perform the
update, immediately or at a
specific time within 24h.
%IP-DECT-NETWORK-
BOOTPROTO%
static/dhcp IPv4 address assigning method.
%IP-DECT-NETWORK-
IPADDR%
IPv4 address Device IPv4 address.