BROADSOFT PARTNER CONFIGURATION GUIDE – SPECTRALINK IP-DECT SERVER SERIES 20-BD5445-00
©
2019 BROADSOFT INC. PAGE 27 OF 49
Tag Name Valid Settings Description
%IP-DECT-NETWORK-
GATEWAY%
IPv4 address IPv4 default gateway.
%IP-DECT-NETWORK-
IPV6-GATEWAY%
IPv6 address IPv6 gateway.
%IP-DECT-NETWORK-
IPV6-IPADDR%
IPv6 address with prefix length Device IPv6 address with prefix
length.
%IP-DECT-NETWORK-
IPV6-METHOD%
static/dhcp/slaac/disabled IPv6 address assigning method.
%IP-DECT-NETWORK-
NETMASK%
IPv4 network mask IPv4 network mask.
%IP-DECT-PHONEBOOK-
LDAP-ATTRIBUTES%
A comma separated list of LDAP
attribute names.
Attributes to return from LDAP
search.
%IP-DECT-PHONEBOOK-
LDAP-BASE%
Base for LDAP search Base for LDAP search.
%IP-DECT-PHONEBOOK-
LDAP-BIND-
PASSWORD%
Valid LDAP server password. LDAP server bind password.
%IP-DECT-PHONEBOOK-
LDAP-BIND-USER%
Valid LDAP server username. LDAP server bind user.
%IP-DECT-PHONEBOOK-
LDAP-FILTER%
See RFC 4515. Filter for LDAP search.
%IP-DECT-PHONEBOOK-
LDAP-NAMES%
A comma separated list of
names to display for each
attribute.
Name to display for each
attribute.
%IP-DECT-PHONEBOOK-
LDAP-NUMBER-
ATTRIBUTES%
A comma separated list of dial-
able attributes
Attributes containing dial-able
numbers.
%IP-DECT-PHONEBOOK-
LDAP-PREFIXES%
A comma separated list of prefix
transformations
Prefixes to replace or strip before
dialing numbers.
%IP-DECT-PHONEBOOK-
LDAP-
REFRESHINTERVAL%
seconds Time between LDAP reloads.
%IP-DECT-PHONEBOOK-
LDAP-URI%
ldap://IPv4/IPv6 address / FQDN URI for LDAP server.
%IP-DECT-PHONEBOOK-
SOURCE%
ldap/csv/disabled Phonebook source.
%IP-DECT-
PROVISIONING-CHECK-
INTERVAL%
minutes Provisioning check interval.
%IP-DECT-
PROVISIONING-
FIRMWARE-DEFAULT-
KWS%
true/false Specifies whether to use Wireless
Server firmware as default for all
Base Stations and Media
Resources.
%IP-DECT-
PROVISIONING-
FIRMWARE-
PP14208700%
File name Specifies the name of the
firmware image to use for
Spectralink Butterfly handsets.
The Spectralink IP-DECT Server
or DECT Server checks for a
version file and a binary file. They
must be located as /.bin.ver and
/.bin
To Next Page
Loading...
