SpectraLink IP-DECT 200 - Page 28

BROADSOFT PARTNER CONFIGURATION GUIDE – SPECTRALINK IP-DECT SERVER SERIES 20-BD5445-00
©
2019 BROADSOFT INC. PAGE 28 OF 49
Tag Name Valid Settings Description
%IP-DECT-
PROVISIONING-
FIRMWARE-
PP14225100%
File name Specifies the name of the
firmware image to use for
Spectralink 75x2, 76x2 and 77x2
series handsets. The Spectralink
IP-DECT Server or DECT Server
checks for a version file and a
binary file. They must be located
as /.bin.ver and /.bin
%IP-DECT-
PROVISIONING-
FIRMWARE-pp14225110%
File name Specifies the name of the
firmware image to use for
Spectralink 72x2 series handsets.
The Spectralink IP-DECT Server
or DECT Server checks for a
version file and a binary file. They
must be located as /.bin.ver and
/.bin.
%IP-DECT-
PROVISIONING-SERVER-
PROTOCOL%
http/https Provisioning server protocol.
(Required)
%IP-DECT-
PROVISIONING-SERVER-
USER%
Device Access User Name Provisioning authentication
username.
(Required)
%IP-DECT-
PROVISIONING-SERVER-
PASSWORD%
Device Access Password Provisioning authentication
password.
(Required)
%IP-DECT-FWVERSION% A valid IP DECT Server
firmware version string. For
example pcs18Ba.
The version of the IP-DECT
Server firmware that will be
provisioned.
(Required)
%IP-DECT-RFP-
DEFAULT-SYNC-TYPE%
Free running, radio, LAN Specifies the synchronization
type used for the DECT radio.
%IP-DECT-RFP-AUTO-
ENABLE%
true/false Specifies if automatic update is
enabled or disabled. Only applies
to IP base stations.
%IP-DECT-RFP-AUTO-
FORCE%
true/false Specifies if an automatic update
should be executed immediately
or wait until devices are idle. Only
applies to RFP6 base stations.
%IP-DECT-RFP-AUTO-
START-TIME%
immediately, hh:mm Specifies when to perform the
update, immediately or at a
specific time within 24h. Only
applies to IP base stations.
%IP-DECT-SECURITY-
ALLOW-HTTP%
true/false Specifies if unencrypted HTTP
request to the web GUI are
allowed.
%IP-DECT-SECURITY-
ALLOW-NEW-MR%
true/false If enabled new media resources
will be allowed to connect to the
server.
%IP-DECT-SECURITY-
ALLOW-NEW-MEDIA-
RESOURCE-AS-ACTIVE%
true/false New media resources will
become active when added.
Otherwise they will have to be
manually activated
%IP-DECT-SECURITY-
ALLOW-NEW-RFP%
true/false If enabled new base stations will
be allowed to connect to the