25
AUXILIARY (AUX) CHANNEL SETUP
SERVO SPEED-
Reduces servo output transit time (slows down the
servo).
Servo Speed can be assigned to any trimmer/switch
CHANNEL PROPERTIES-
Displays current position of the AUX channel.
TRAVEL-
Allows independent precise adjustments of the end
points.
REVERSE-
Reverses servo output direction.
THROTTLE SUBTRIM-
Used to correct minor servo arms/ linkages
inaccuracy’s.
IMPORTANT: Use minimal Subtrim values. Subtrim offsets the entire stroke
including the center and endpoint positions.
To Next Page
Loading...
