EasyManua.ls Logo

SPIDER SC1000 - H) Hoist Operates in DOWN Direction When Overspeed Brake Test Button Is Pushed; I) Hoist Does Not Stop Immediately When the Control Switch Is Released; J) You Hear Unusual Noises Coming from the Hoist and YOU ARE in the AIR; K) You Hear Unusual Noises Coming from the Hoist and YOU ARE on the GROUND

SPIDER SC1000
35 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Document No: 9961 FIssue Date: Jan-29-2018 Page 29 of 35
This document and all copies are the property of Spider
®
. All dimensions and data are indicative only.
The user must ensure that the equipment complies with local rules and regulations.
= Inspect
= Verify
= Perform process
 
 





Call your supervisor.


®
service center for servicing and
repair.
 



Push the overspeed brake test button and wait to be rescued.
Call your supervisor.

®
service center for
servicing.
 




 

Push the emergency stop button.
Push the overspeed brake test button and wait to be rescued.
Unplug the hoist from the power cord.
Call your supervisor.

®
service center for
servicing.
 






Check for damaged wire rope and replace as necessary.
Check for dirt on the wire rope and clean/lubricate as necessary.
Check the hoist for visible signs of damage.
Call your supervisor.

®
service center for
servicing.
More troubleshooting solutions on next page

Table of Contents