Page 30 of 35 Document No: 9961 Revision: F Issue Date: Jan-29-2018
This document and all copies are the property of Spider
®
. All dimensions and data are indicative only.
The user must ensure that the equipment complies with local rules and regulations.
= Inspect
= Verify
= Perform process
You have determined that there is enough wire rope to reach a
safe landing surface.
You know that the wire rope is not jammed in the hoist.
You know the reason that the overspeed has been tripped and
there will be no danger when it is reset.
You have checked for and corrected the following situations:
Undersized wire rope
Worn parts
Foreign contaminants that defeat traction, such as ice or
lubricants.
Improper use of the platform, such as overloading.
Power the hoist up a
few inches at the same time
as you turn the reset knob
clockwise until the reset
knob engages.
More troubleshooting solutions on next page
To Next Page
Loading...